Відео

Thank you for this video, it helped me a lot 🙂

В общем поменяйте предохранитель магнитолы и все будет в ажуре) Заработают и омыватели и прикуреватель и приборка печки

Thank youuuuuu

Thank youuuuuu

Hello can’t find gold screw??

Came to the comments for the same thing. Dunno what this insulation stuff is :O My kinda DIY, go straight into it without knowing :) I'm doing the same job, removing my oil Aga, so your video has been useful thank you. Oh and it's Vermiculite as said. Just gonna get me big ol henry on it and bag it up.

Best way by far is to remove wishbone and leave subframe and rear bush housing in place. Buy poly bushes for rear bush replacement - these bushes come in two parts an inner part and outer part. Use a sabre saw or reciprocating saw with metal blade and cut through the rear bush metal sleeve and it will come out easy. Free off a bit with a chisel on the sleeve part sticking out if you have to. Once out the outer poly bush pops into the bush housing. Then pop poly bush inner part onto the wishbone when ready to install. It all slides in easy with the poly grease and allows rotation movement without twisting. Far better design than original and cheap too. Done a couple of minis this way and would never replace these rear bushes with original spec again, after fighting with getting the wishbone back in for hours one time. I knew after I’d finished I’d probably damaged the new bush too! Poly bushes definitely the way to go- fit and forget plus zero lateral movement too.

really helpful thank you

Hi got same problem but my car now is loud and gearbox gears changing not quick

Great video mate,

thank you so much. This has been a life-changing and an eye-opener.

Hi mate, thanks so much for the vid, it got my Mrs out of a real pickle ....top man

What about water coming from the beck of the sunroof and leaking from the roof inside?

Just had my MOT and i mentioned i sometimes get a banging noise from the passenger footwell especially with a bit of acceleration lift on uneven road. Do you think it will be this bush, Mot tester could see slight cracking in both bushes so gave an advisory and I was keen to sort the noise out. I had the anti roll bar bushes done on a previous mini when i had a similar noise, probably best to do both as the subframe had to be dropped when they done the last one.

Brilliant video - thank you - thanks to you...problem solved👍

Where is the part 2?

They're meant to be loose and are designed to let water drain out while stopping fumes etc going up and into the air vents. I removed mine with a long thin rod (could use wire coat hanger) and they were completely clogged up. Once they're clean, you can then refit them and every now and then, give the bottom of the drainage plug a squeeze, and it will let out dirt leaves etc.

What about the break fluid? Power steering fluid? Thanks

Sorry to bother you again....just checked the oil, is there a rubber gasket on the cap or where the cap screws into?

as a learner this is really helpful thank you

Coolant level check, when engine warm or cold please?

did changing the pressure sensor work? I've got the same issue - got the error code ABS-DSC: Pressure Sensor 2

Hi how long does the thermostat take to replace thanks

Any idea i have audi a6 bass speaker working but mid speaker now working but there is 12V I don't understand any ideas?

It's 17/1/24..got my self a 2012 one of these... Love the car nice little cheap run around.. Came here about the coolant a few things on this car not to easy but okay I suppose the coolant readings abit hard to see and the dip stick comes out at such a angle lol... Got a water leak in mine rear somewhere seen some videos could be the rear top brake light... Any ideas

Thanks for this man! My car is making a weird noise and with not knowing what i need, or wat to look for, i've put it off, i will be checking all these :) Thanks :D

Friend has mini, top stuck open, looks like your fix might work. Loved your comments about the car! Laughed my ass off. Been there myself.

12:12 these dipsticks are horrible haha

5:50 it's 3L exactly

You should tell your audience what year car your demonstrating whether it is LCI or not.

Great job

That’s the most rigged fight I’ve ever seen in my life the lad in red didn’t even land anything

Obrigado. Era o que eu procurava para encontrar o motivo do meu Beetle estar cheio de água no interior 👏👏👏

Why tf would this happen

Most helpful! From the car booklet I couldn’t work out how to check the coolant level.

Thanks Mate 👍Super helpful. I have 2 beetles and same problem on each side. I will do that unblocking same way

I don't why didn't just remove lower arm now have access to the subframe bolts that hold the lower arm. I've done job twice on two separate minis dropped subframe just enough to get the long bolts out.Thanks

Thank you so much, really helpful ❤

Finally an explanation why my floor is wet in my 2000 bug!!!❤

Daughters friend had a unit that had blown, locating it in the bottom of the tyre well seems a deliberate design issue that has since been relocated by BMW. Why they didn’t do a product recall puzzles me.

Unfortunately, this method has not worked for me. With my wife in the car and the engine running in reverse, there is no sound coming from any of the 4 sensors. I guess I will need to pull the bumper cover and test them with an Ohm meter.

Fantastic video. Showed me everything I needed to know!

I know this is a pretty old video at this point, but twice now in the 5 weeks since we bought this 2010 Mini Convertible, I've needed the wisdom shown here. I'm trying not to dislike this little car, but it's not making it easy. Thanks, man!

Dude, this video saved my evening. Hours of screwing around with that stupid thing was cut down to 10 minutes of your videos. Thank you so much!

Great video with clear and very thorough instructions. I’m going to be doing this on my E61 535d when the parts arrive. From the comments, I see there is one bolt on the 535 that is more difficult to access? Also, do I need to drain all the coolant out before? Also, I couldn’t see a procedure to bleed the system after….is this necessary? Thanks and again great video!

Hi, did you mask it up in place or did you remove the mesh? It looks like my mesh is epoxied on!!

Mine doesn’t have a water thing how can this be?

Perfect thank you

Why are your rocker panels not rusty???

fantastic video thank you so much. My sun roof is once again closed. Mine wasn't an umbrella on the parcel shelf mine was stuck because a shopping bag strap had got caught in the locking hook!